Samsung Esa PDP4294LV Owner's Instructions Manual page 23

BN68-00711A-00esa_E2(walldel) 2004.4.30 2:55 PM Page
This PDP displays the optimum picture in 720p mode.
PDP
OF
Power
Plug
DTV Receiver
Audio Cable
DVUCable
Use the DVI_Dconnection cable. (sold separately)
1 Connect the cable or antenna to the antenna input jack on the DTV.
2 Connect a Video cable between the Y, Pb, Pr (COMPONENT 1,2) or DVI jack on the PDP
and the Y, PB,PR(VIDEO OUTPUT JACKS) on the DTV receiver.
3 Connect an Audio cable between the COMPONENT 1,2 (LiR AUDIO) or DVI jacks on the
PDP and the AUDIO OUTPUT jacks on the DTV.
ToWatd {)'iV:
1. Turn on your PDP,and press the SOURCE button on the remote controk
2. Move the joystick up or down to select the "COMPONENT1 ", "COMPONENT2" or
"DVF, then press the joystick to enter.
3. Turn on your DTV receiver.
For an explanation of Component video, see your DTV receiver owner's instructions.
23