Reebok RL900 User Manual page 8

11. i dentify the LeftHandlebar (7).Attachthe Left
Handlebar to theleftPivot A rm(20)withfourM8x
13mmButton Screws (90)asshown.
AttachtheRightHandlebar (6)to therightPivot A rm
(20)in thesameway.
12.Position t heFrontLeftPivotCover(21)andthe Rear
LeftPivotCover(31)overthe leftPivot A rm(20)as
shown. A ttachtheLeftPivotCovers withan M4x
16mmRound HeadScrew (91)andtwoM4x 16mm
Screws (89).
AttachtheFrontRightPivotCover(29)andtheRear
RightPivotCover(notshown) o vertherightPivot A rm
(notshown) inthesameway.
13.While another p erson holds theConsole (17)nearthe
Upright ( 4),attach the Upper WireHarness (58)and
the PulseSensor W ire(25)tothecorresponding con=
solewireharnesses. Then,attach theConsole tothe
Upright w ithfourM4x 16mm Screws (89),being
carefulnot to pinchthe wires.
AttachtheUpright C over(22)to theUpright ( 4)with
twoM4x 16mm RoundHead Screws (91).
14. P lugthePower C ord(56)intothe Power R eceptacle
(70)attherearoftheelliptical e xerciser.
11
9O
12
91
\
31
/ /
89
\
89
13
22
25
17
14 ',
I
/
I \
/ /
56
15.MaRe sure that all parts of the eHipticam exerciser are properly tightened. Cover the floor beneath the
elliptical exerciser to protect the floor from damage. Note: Some extra hardware may be left over.