Table of Contents
Advertisement
Setting the Clock
The TV/_rCR has an automatic
clock setting feature that automatically
sets the
time from an EDS (Extended
Data Service) channel "a_en the power
is turned
off, If there is no EDS channel, the signal is weak, or you don't want to `a_aitfor
%e time to be downloaded
to the TV, you can set the clock manually
(instructions
are, on page 35).
To
1,
2,
set the clock.
Display the 77ME menu, use the up or do,am arrow to select CLfiK;TgSETand
press OK.
71_e CLfiK;T4SE, T screen
appears. Press the up or down arrow to select A_VD
¢iiLfiK;_ ONand press OK,
The indicator moves to EDS CH. If you know the EDS channel in your
area, use the up and down arrows to enter the number
or select a&TrO and
press OK.
T_arn off the power. The dock is set automatically
using the EI)S signal, It
m W take a few hours to set the clock,
Add or Erase Channels
You might want to add or erase some channels
if th%"re Lnactive, have weak
signals, or you don't `a_ant them in your channel list. The channel list is the list
of channels
that the TV:_/GR tunes to when you press the channel up and'or
channel do`am buttons,
Note: Even if you erase a channel, you can still tune to it by pressing the
number buttons
on the remote control.
1,
Press N'mNL7on the remote (the main MEzNWappears).
2,
Press down arrow burton to highlight
5T77_rG,
3,
Press OK (the SE_NG
menu appears).
4,
Press %e down arrow button to highlight
(;Tf MEMO,qK
5,
Press OK (the CH MEMORYmenu
appears).
Follow %e on-screen
d[retrtions
to ADD or ER,4SE a channel,
6,
You can add or erase more channels
by entering the channel number
or
pressing CII + or CII -.
7,
To exit, press
the N_mNq_: b urton,
Advertisement
Table of Contents
