Add Or Erase Channels; Turn Off The Energy Save Feature - RCA TV/VCR User Manual

TIME
TIMER
CLOCK SET
CLOCK SET
AUTO CLOCK
EDS CH
SELECT / : SET
PREVIOUS : QUIT
MONTH
DAY
YEAR
TIME
SELECT /
PREVIOUS
MENU
TIME
VIDEO ADJUST
AUDIO ADJUST
CLOSED CAPTION
TIMER RECORDINGS
LANGUAGE
SETTING
V-CHIP BLOCK
SETTING
SELECT / : SET
FUNCTION
PREVIOUS : QUIT
AUTO CH PRESET
CH SEARCH
CH MEMORY
CH MEMORY
CABLE
AIR 54
ADD
SELECT / : SET
PREVIOUS : QUIT
SELECT /
PREVIOUS
Chapter 1
Setting the Clock
The TV/VCR has an automatic clock setting feature that automatically sets the
time from an EDS (Extended Data Service) channel when the power is turned
off. If there is no EDS channel, the signal is weak, or you don't want to wait for
the time to be downloaded to the TV, you can set the clock manually
ON
(instructions are on page 35).
AUTO
OK
MENU
---
---
To set the clock.
----
--:----
1. Display the TIME menu, use the up or down arrow to select CLOCK SET and
press OK.
: SET OK
: QUIT MENU
2. The CLOCK SET screen appears. Press the up or down arrow to select AUTO
CLOCK ON and press OK.
The indicator moves to EDS CH. If you know the EDS channel in your
area, use the up and down arrows to enter the number or select AUTO and
press OK.
Turn off the power. The clock is set automatically using the EDS signal. It
may take a few hours to set the clock.

Add or Erase Channels

You might want to add or erase some channels if they're inactive, have weak
signals, or you don't want them in your channel list. The channel list is the list
of channels that the TV/VCR tunes to when you press the channel up and/or
channel down buttons.
Note: Even if you erase a channel, you can still tune to it by pressing the
OK
number buttons on the remote control.
MENU
1. Press MENU on the remote (the main MENU appears).
2. Press down arrow button to highlight SETTING.
3. Press OK (the SETTING menu appears).
4. Press the down arrow button to highlight CH MEMORY.
OK
MENU
5. Press OK (the CH MEMORY menu appears). Follow the on-screen directions
to ADD or ERASE a channel.
: SET OK
6. You can add or erase more channels by entering the channel number or
: QUIT MENU
pressing CH + or CH –.
7. To exit, press the MENU button.
Connections & Setup
13