RCA T27TF668 User Manual page 12

W/VCRbackpanel
From
FromA.tennaiCeble Feed Satellite
Note: If you have model
T27TF668, the placement
of the jacks is different
from the TV/VCR back
panel illustrated here.
N_te: The back of
your satellite receiver
might not look
exactly like the one
shown here.
Connection: TV/VCR + Satellite Receiver
1. Connect file satellite receiver to the TV/VCR
A, Connect one end of an RF coaxial cable (not included) to the TV/AzCRis
ANTiCABI£ lack. Connect the other end to %e satellite receiver's antenna output
lack (sometimes labeled nEFF TO T_.
B, Connect the A,W cables, Connect audio cables to the TV/WCR's ],TNEIN/IN 1
ALTD]O(L and R) jacks and the other ends to %e satellite receiver's corresponding
audio output lacks, Connect one end of the video cable to the TV/_,zCRis LIN_ IN/
IN I "vqDEO lack, and the other end to the satellite receNericable boys video
output lack,
2. Connect antenna or cable to your satellite receiver
Connect the coaxial cable from your antenna, cable feed, or cable box to the Antenna
input jack on the satellite receiver (sometLmes labeled IN FROM ANT).
3. If necessary, connect the satellite's antenna cable to the satellite receiver
If the coaxial cable from the satellite dish antenna isn't aheady connected to the
satellite receiver's input jack (sometimes labeled SATELIJTI_.IN), connect it now,
Go To Page 11