Table of Contents
Advertisement
CAUTION
TO AVOID DAMAGE:
1. DO NOT CONNECT
SPEAKER OUTPUT TO A
SEPARATE AMPLIFIER
OR TO SPEAKERS
CONNECTED
TO
ANOTHER PRODUCT.
2. DO NOT CONNECT
LEFT AND RIGHT
SPEAKER OUTPUTS
TOGETHER.
•
_:
VtOEO
EXTERNAL
SPEAKERS
Terminals-permit
direct
connection
of auxiliary
speakers.
Connection
details are
on page 38.
_)
CABLE/ANTENNA
Connector-used
when attaching
either a home antenna or a cable-TV
system to your TV.
Connection
details are on pages 26-27.
_)
SPEAKER
Switch-when
you connect additional speakers
to the EXTERNAL
SPEAKERS
terminals on the TV, this
switch lets you optimize the sound for the speaker
location
you choose.
•
If you place the speakers on each side of the TV, put
switch in EXTposition.
If the left side of the switch is
labeled EXT, the internal
audio from the TV's speakers
will be muted.
•
If you place the speakers
behind the viewer (at the back
of the room), put switch in INT/EXT
SURR position.
This maintains
normal volume level of the TV's
internal
speakers
and a surround
signal to rear
speakers.
•
Details about connecting
speakers
to the TV are on
page 38.
IMPORTANT:
Always place switch in INT/EXT SURR
position if no external speakers are used (or if external
speakers are ever disconnected).
@)
SELECT
OUT Jacks-provide
fixed-level
audio and
video output from whatever
is displayed
on the TV
screen (see notes below).
Provide
audio and video
signals suitable for recording.
Can be used for several applications
such as:
• VCR editing with two or three VCRs (page 31).
• recording
TV programs
onto a camcorder
(page 34).
• recording
cable-TV
programs
onto a VCR that is not
cable-ready
(page 3 l).
• recording audio onto an audio cassette
tape recorder
(page 36).
Notes
• Remember that whatever you want to record must be
displayed on the TV screen during recording.
• Video signals from the S-VIDEO connector can not be
recorded from the SELECT OUT VIDEO jack. To record
from an S-VHS component connected to the S-VIDEO
connector, you must also connect the video cable to the
VIDEO INPUT l jack and then select channel 91 on the TV
screen.
• On-screen displays such as menus and status displays can not
be recorded from this jack.
• Special features such as picture-in-picture can not be recorded
from this jack.
_)
_
INPUT
2 Jacks--provide
for direct connection
of video
V
v
devices (like VCRs) or compatible
home computers
and
TV games with video/audio
outputs.
To see the signals from a device that is connected
to the
lNPUT2jacks,
tune your TV to channel
92.
6(_ 6(_ INPUT
1 Jacks--provide
for direct connection
of video
devices (like VCRs) or compatible
home computers
and
TV games with video/audio
outputs.
To see the signals from a device that is connected
to the
INPUT I jacks,
tune your TV to channel
91.
S-VIDEO
Connector-provides
for direct S-VHS
video
connection
from S-VHS VCR or camcorder.
Remember
to also connect
the S-VHS VCRs or
camcorder's
audio jack(s) to the TV's lNPUT
1 LEFT
and/or R/MONO
audio jacks.
This is necessary
because
S-Video cables only carry the super video (picture),
not
the audio signal.
Connection
details are on pages 31
and 34.
Signals
from S-VHS devices connected
to the TV's
S-VIDEO
connector
and INPUT l audio jack(s)
can be
viewed by pressing
the TV button followed
by 9 then 0
on the remote control-(or
by scanning to TV channel 90
if you have added "90" to channel memory
as described
on page 21).
Note: If you want to use the SELECT OUT jacks, remember to
also connect the S-VHS component's regular video cable to the
VIDEO INPUT I jack, and then tune to channel 9t.
HI F! OUT Jacks-feed
volume-controlled
stereo audio
out from whatever
is displayed
on the TV screen.
Allow
connection
of audio amplifier
and lets you adjust sound
level with TV's remote.
25
Advertisement
Table of Contents
