Table of Contents
Advertisement
1.
Repeatedly press MENU to select SETUP MENU
and then press + or - to display the setup menu.
2. Repeatedly
press
MENU to
,,;elect
function,
then press
+ or- to
adjust it.
Cable/Air. Cabie
" "" . ..........
VCR 1 Chart: Off .
VCR 2 C_Off
-
taboo e_an- On :.
ClockSet -Hr +Min
The CAPTIONING feature lets you display the audio portion of programs
encoded with the Closed Captioning (CC) information as text on the screen.
Four types of closed captioning are available. Select CAPTIONS 1 for full
,ii;__ translation of the primary language in your area. CAPTIONS 2 is used for
secondary language translation, or an alternate service, such as simplified
English. Two Text modes are also supported.
By setting the SLEEP TIMER, you can program your TV to turn itself off
after a certain period of time. This is usefifl whenever you want to watch "IV
for an hour or so before going to sleep. Press the + or - button to select the
length of time you want the TV to stay on.
You can program your TV to turn on and/or off at the times you choose by
setting the ALARM function.
CHAN LABEL lets you program names (c,rlabels) for the channel numbers.
The names you select will then appear on _thescreen whenever the channel
number is displayed.
The PARENTAL CONTROL feature lets you lock out any channels that you
don't want your children to watch. Pressing + or - switches this function
from OFFto ON. When this function is set to ON, channels that have been
locked out with the CHAN CTRL function cannot be viewed. When this
function _s set to OFF, all channels can be viewed.
The CHAN CTRL (Channel Control) function works hand-in-hand with the
PARENTAL CONTROL function. It lets you select the channels you want to
lock out. First select the channel number you want to lock out and then
press + to change this function from NORMAL to LOCKED.
When the
PARENTAL CONTROL function is set to ON, the channels you locked with
this function cannot be viewed.
When you press + or - to start the AUTOPROGRAM
function, the TV will
-"_.
automatically cycle through all channels and place the active channels for
.....' your area in its channel memory. Pressing the CHANNEL up or down
buttons will then allow you to scan only active channels.
The CHANMEM
function allows you to erase and add channels to channel
memory as desired.
The CABLE/AIR function tells your TV whether you have a cable-TV system
or a home antenna connected to the TV. _k)ur TV is so automatic that you
will probably never need to change this function. When your TV
autoprograms, it automatically adjusts the CABLE/AIR setting for you. If
you should ever need to override the automatic setting, press + or - to
change it.
The VCR 1 CHAN function lets you program to which channel the TV will
automatically tune when you press the VCR 1 button on the remote.
The setup menu will automatically
disappear
from the screen if you do not press + or-
within a few seconds.
Via remote control, your TV will "remember"
which function you displayed
last-even
after the
menu has disappeared
from the screen.
So, if you
want to adjust the same function
again, simply
press the + or - button on the remote control.
The last function you adjusted will appear on the
TV screen.
The VCR 2 CHAN function lets you program to which channel the TV will
automatically tune when you press the VCR 2 button on the remote.
The CABLE CHAN function lets you program to which channel the TV will
automatically
tune when you press the CABLE button on the remote.
_
After you set the clock, you will be able to see the on-screen time display
°_ whenever you change channels or press the DISPLAY or TV button on the
_s remote control. To set the clock when thi.,;function is selected, first press
and hold - to set the correct hour (including AM and PM). Then press and
hold + to set the correct minutes.
15
Advertisement
Table of Contents
