RCA G27750 Owner's Manual page 34

The digital remote control that came packed with your TV
controls your TV and up to two compatible RCA VCRs.
To control a compatible RCA VCR, first press the VCR1 or
VCR2 button to put the remote in the "VCR mode". The
buttons shown below will then control the VCR.
Selected models of RCA VCRs have a switch that lets you
determine which VCR will be controlled by the VCR1 button,
and which VCR by the VCR2 button. Other models have an
on-screen menu that lets you determine if it will be controlled
by VCR1 or VCR2. Additional information about controlling
two RCA VCRs is in the note on the next page.
If you have another brand of VCR, you can probably also
program your remote to control it. Details are on the next
page.
OFF/ON Button .............
Press to turn off VCR.
Number Buttons .........
• Press two numbers to select
channel.
• Press; a "0" before a single-digit
channel number.
PROG (Program) Button .......
Used when setting the clock and \
programming the timer.
ANT Button ............
Same as VCR or TV/VCR button on
front of VCR. Lets you record one
channel with VCR and watch another
channel on TV.
k\
\,
\
PA USE Button .....
• Press to pause play or record
mode.
.y.___J 1, •
PLAY Button -_ ..........
Press to start tape playing. .-- "
REWIND Button jl. /
/'
/
• Press while VCR is stopped to /.
rewind tape. /
/
• Press while VCR is playing to /
search backward. /
/
FF (Fast Forward) Button /
• Press while VCR is stopped to
fast forward tape.
• Press while VCR is playing to
search forward.
/f VCR1 and VCR2 Buttons
/z- • Press to turn on VCR and put
remote in "VCR Mode" so other
.J// buttons will control the VCR.
_ /T __ • Press the TV button to put remote
back into "TV Mode".
VCR1 VCR2
- CABLE AUDIO
OO
CHANNEL
C,1) C 2)
U
(9) C0)
INPUT CS PC MUTE
O0 O0
MENU -- + ID
,(0 ®® o)
ANT, PROG CSR DI_)LAy
"O 'O
REWIND FF RECORD
,, PIP SWAP
0 0 0
FRZ MOVE
©©
CHANNEL Buttons
Press to select the next higher or lower
channel in VCR channel memory.
/ DISPLAY Button
/ Press to bring VCR's displays to TV
screen.
CLEAR Button
Used when setting the VCR's
clock and programming its timer.
STOP Button
Press to stop whatever VCR is doing:
Playing, Recording, Rewinding, or
Fast Forwarding.
RECORD Button
Press to record.
Notes:
• The six VCR buttons grouped together
(PLAY,PAUSE, STOP, REWIND, FF, and
RECORD) control the VCR even if the
remote is in the "TV Mode".
• The ANT, PROG, CLEAR, and DISPLAY
buttons are for RCA VCRs only.
32