Table of Contents
Advertisement
4. Hold the treadmill firmly with both hands, and lower the
treadmill to the floor. Caution: To avoid pinching your
hands, do not hold the treadmill in the locations in-
dicated by the arrows. To decrease the posalblllty of
Injury, bend your legs and keep your back straight.
5. Remove the backing from the Adhesive Clip (90). Press
the Adhes'we Clip onto the Rear Roller Cover (82) in the
indicated location. Press the Allen Wrench (89) into the
Clip.
.
6. For the console and television to operate properly,
an antenna, a CATV cable, or a VCR must be con-
nected to the 75 ohm antenna terminal on the tread-
mill (see the drawing at the right).
If you are uslng an antenna, it must be properly con-
nected and adjusted for optimal recepfion. Refer to AN-
TENNA CONNECTIONS
on page 17 to prope_dy connect
an antenna.
If you are using a CATV cable, refer to CATV CABLE
CONNECTION
on page 17 to propedy connect the cable.
if you are using a VCR, refer to HOW TO CONNECT A
VCR on page 22 to properly connect the VCR.
Do not hold here
,_
"
89 _
75 Ohm
Antenna
Terminal
Make sure that all parts of the treadmill are properly tightened. To protect the floor or carpet from damage,
place a mat under the treadmill. Read all Instructions in this manual before operating the treadmlll.
Advertisement
Table of Contents
