ProForm 785 TL User Manual page 20

Inaddition tonormal
b roadcast reception, the "IV is
equipped to receive up to 125 cable channels (113 plus
12 TV channels). To use the TV with a cable TV sys-
tem, following the steps below.
-1. Press the MENU button to
turn on the pop up menu.
Press the MENU button
again to select CH MEM-
ORY.
I>CH MEMORY
ANALOG
CLOCK/TIMER
Picture level controls are preset to nominal levels. If de-
sired, you can individually adjust the contrast, bright-
ness, color, or tint by following the steps below.
1. Press the ANALOG SE-
LECT button repeatedly to
select the attribute that you
want to adjust: contrast,
brightness, color, or tint.
CONTRAST
000.............
2. Press the + or- button to
move the arrow to
TV/CATV. Select
TVICATV by pressing the
MENU button.
AUTO MEMORY
SEARCR/SKIP
• MEMORY ADD
•.*ERASE
1> TV/CA'I'V
[ o7
3. Press the MENU button to
cycle through the four
channel modes: (1) TV;
(2) STD (Standard) for
cable TV mode; (3) HRC
(Harmonic Related
Carder) for cable "IV sub-
scriber;,(4) IRC (Incre-
mental Related Carrier) for cable "IV subscdber.
Once the appropriate cable TV mode is selected, the
screen will return to normal after two seconds. Note:
Consult your cable company if you are not sure wh!ch
system you are using, or try different systems to obtain
the maximum number of channels.
To toggle between the "IV mode and the cable "IV mode,
press the TVICA'IV button on the TV or the remote control.
To memodze cable TV channels, refer to CHANNEL
PROGRAMMING on pages 18 and 19.
CATV Channel Reference Table
Use the table below to find which CA'rV channel your
TV is displaying. The top row (in bold) represents the
channel number shown on the "IV screen; the bottom
row represents the corresponding CATV channel.
2. Press the + or- button to adjust the level. Note: If
four seconds elapse without a button being pressed,
the display will return to the normal screen.
Press the TV/AV button on the IV or the remote control
to toggle between "rv and VIDEO input.
The volume of the TV can be momentarily muted, if de-
sired, for a reason such as a telephone call To mute
the volume, press the MUTE button. A bar on the "IV
screen will indicate that the volume is at the minimum
level. To return the volume to the previous level, press
the MUTE button again or press the VOLUME + or -
button.
1,2.... 6 ,... 13,14....26.... 36,37....50.... 65,
5A. 2....6,... 13, A .... M ....W,W+I.. W+14..W+29,
66.... 75 .... 86.... 94, 95 .... 99,100.... 112 .... 125
W+_I0 ..W+39 .. W÷50 ..W+58, A-5 ..A-l, W+59.. W+71 .. W+84