4. Attach the PulseSensor(114)tothe Headband ( 115).
Makesurethatthesensorwindowis pressed t hrough
theindicated holeinthe Headband.
PreSs openthe
clothes clip, and insert the pulse sensor
wire Into the clothes clip. Make sure that the pulse
sensor wire is resting against the hinge of the
clothes clip (see the Inset.drawing),
"[he use of the
• oulse sensor is exolain_:l_r_ baoe 8. "
Sensor
Window
Pulse Sensor Wire
5. Remove the backing from the Adhesive Clip (90). Press
the Clip onto the Rear Roller Cover (82) in the indicated
location. Press the Alleri Wrench' tBg_ intothe"Clio.
Make sure that all parts are tightened before you use the
treadmill. Note: To protect the floor or carpet, place a mat
under the treadmill. For information
on ordering a mat,
see REPLACEMENT
PARTS on the back cover.
:J
7