ProForm 725 TL User Manual page 19

HOWTOMOVETHETREADMILL
Beforemoving thetreadmill, convert t hetreadmill to thestor-
ageposition as described a bove.Makesurethatthe stor-
agelatch is closedfully overthe
frame guide.
: 1. Hold the upper ends of the treadmill. Place one foot on
;ithe base as sho_'n_"
2. Tilt the treadmill back until it roils freely on the front wheels.
Carefully move the treadmill to the desired location. Never
move the treadmill without tipping It back, or the base
pads mJ_, c_me off. To reduce _e'rl_l_ of Inju_i_'us;_-
extreme caution while moving the treadmill. Do not at-
tempt to move the tre_cJmilJ0v_J"_n uneven surface.
3. Place _one foot on the base, and carefully lower the tread-
mill until it is resting in the storage position.
Base
eels
HOW TO LOWER THE TREADMILL FOR USE
1. Hold the upper end of the treadmill with your right hand as
shown. Using your left thumb, slide open the storage latch
and hold it open. Pivot the treadmill until the frame is past
the storage latch. Storage
Latch_
2. Hold the treadmill firmly with both hands, and lower the
treadmill to the floor. Caution: To avoid pinching your
hands, do not hold the treadmill In the locations Indi-
cated by the arrows. To decrease the possibility of in-
jury, bend your legs and keep your back stralghL
Do not hold here
"19