Programming Channel Memory - ProScan PS27123 Owner's Manual

Programming Channel Memory
The quickest way to program the Channel Memory is
to use the AUTOPROGRAM function. Your TV
automatically cycles through and places active
channels into Channel Memory.
Follow the instructions below to autoprogram channels,
then add or erase individual channels as desired.
The TV first programs all channels for
ANT
A input and
then all channels for
ANT B
input (even with one antenna
input connected).
AutoProgrammingChannelsinto ChannelMemory
with or without remote
1 Connect home antenna(s) or cable-TV to your set.
2 Repeatedly press the MENUbutton to select
SETUP
MENU
and press + to display the setup functions.
Mute -
V'_deo _u
3 Repeatedly
press the MENUbutton until the
AUTOPROGRAM
menu is selected.
When the TV finishes cycling, you can check which
channels are in memory by pressing the CHANNEL up or
down button. Your set will stop on each of the channels in
memory.
Your TV will remember which channels are in memory
until you erase them or until you autoprogram channels
aga!n. Extended power failures have no effect on the
channel memory.
I_¸
Press either + or - to begin programming: The TV will
cycle thru available channels in your area and. place active
channels into memory,
21