Basic Functions - ProScan PS27123 Owner's Manual

Video Menu: Basic Functions
1. Repeatedly
press MENU to
select VIDEO
Mute
MENU. _ I_ii,[_,
Audio Menu
Setup Menu
2. Then press + or - to
displaythe video menu.
MENU
3. Repeatedlypress i
J
MENU to select a 1_°][.i
function, then press + Tint -, ...... |........ ÷
Contrast -. ....... I........ +
or-to adjust it, Bright - .......I........+
Sharp -, ...... I........ +
Picture Reset
COLOR adjusts the amount of color in the picture. Press + to
increase color or press - to decrease color.
TINT adjusts the color of flesh tones. Press + to add more red
tint or press - to add more green tint.
CONTRAST adjusts the overall brightness and contrast of the
picture. Press + to increase contrast or press - to decrease
contrast.
BRIGHTNESS adjusts the brightness of the dark portions of the
picture. Press + to increase brightness or press - to decrease
brightness.
Pressing MENU moves down the screen (one item per press).
The video menu will automatically disappear from the
screen if you do not press + or- within a few seconds.
'via remote control, your TV will "remember" which
tSanction you.displayedlast, even after the menu has
disappeared from.the screen. So, if you want to adjust the
same function again, simply press the + or - button On the
remote control. The last function you adjusted Will
reappea¢ on the TV screen.
SHARPNESS adjusts picture sharpness. Press + to increase
sharpness or press - to decrease sharpness.
• PICTURE RESET
lets you quickly change all the video functions
shown above back to the factory settings. Press either + or - to _
reset the video.functions.. . ' _ "
r.€l
Custom Picture Memory for Input Channels
The channe! numbers you select to see signals from
components (like a VCR) that are connected to the INPUT
jacks on the back of the TV are called input channels.
Selecting• channel 90 lets you see the signal- coming from
whatever component is attached to the s VIDEO connector,
channel 91 lets.you see the signal from the INPUT 1 jacks,
and channel 92 lets you see the signal, from the INPUT 2.
jacks. Your TV is equipped, with a custom picture memory
for these input channels. When the TV is tuned to one of
these channels (90, 91,92), yo u can change the picture
settings for that component's signal as desired without
,:hanging the settings of any.other channel. This isvery
useful because you will be able to adjust for the best
.picture from each of your components and the TV will
:remember those settings automatically the next time you
tune that input channel.
11