Labeling Channels - ProScan PS27123 Owner's Manual

Labeling Channels
The labeling feature lets you program names (or labels) for
the channel numbers. The name you programmed will then
appear on the screen below the channel number whenever the
channel number is displayed. Each name can contain up to
four characters, and you'll be able to assign up to 64 names.
Listed below are the letters and characters from which you'll
be able to choose when programming the channel labels:
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
(blank space) ! "#$%&'()fi+,-/.
0123456789
:;<=>?@
Labeling Channels
with or without remote
1 Repeatedly press the MENUbutton to select SETUP MENUand
then press + to display the setup functibns.
2 Repeatedly
press the
MENU button
to select
CHAN
LABEL.
Select the channel number you want to label by pressing the
CHANNEL up or down button (or by pressing two number
buttons).
10:52
Press and hold the
VOLUME
up or down button on the remote
control until the letter or character you want appears on the
screen. Pressing VOLUMEup sequences through the characters
in alphabetical order. Pressing VOLUMEdown sequences the
letters in reverse order.
10:53 07
Him
f
Then press _-to move to the next letter frame. Pressing -
moves you back to the previous letter frame.
=.
mm
ma*
=
crQ
3. Press + to enter the CHANLABELfunction. Four blank letter
frames will appear under the channel number.
SetAlarm
7 Repea! steps 5 and 6 untii the name is complete. You can now
label another channel,• if desired, by selecting the channel
number and repeating steps 5 and 6.
8 When finished, the displa3; will automatically disappear from
the screen in a few seconds. Your labels will remain in
memory until you erase them.
Erasing Channel Labels
To erase a channel label, first follow steps 1-4 and then press
CLEARon the remote control.
19