Table of Contents
Advertisement
USING
POINTAND
SELECT
J
You only need to know one rule when using the remote to access on-
screen menus and control
panels: point and select. The point and select
method
has two steps.
1.
Point to a menu item using the MOVE arrows on the remote.
To point up or down, press the up or down arrows. To point
left or
right, press the left or right arrows.
2.
Select a menu item by pressing MENU or OK.
Selecting an item tells the TV's menu system to go ahead and make
the change or go to a place you have indicated.
ENTERING
SETUP
The first screen of the Interactive
Setup appears automatically
when
you turn on your TV for the first time or after a power outage.
1.
Press MENU to begin setup or CLEAR to exit.
<3©C>
Pointand Selectbuttons
You can also access the Interactive
Setup through
the Main menu:
1.
Press MENU to bring up the Main menu.
2.
Point to Setup and press MENU or OK. The first Setup screen comes
up, asking you to confirm
that you want to begin.
You can also select a menu item by
entering
the item number with the
number buttons
on the remote,
Press CLEAR at any time to remove all
displays from the screen and return to TV
viewing.
12
Advertisement
Table of Contents
