Table of Contents
Advertisement
CLEAR Removes any menu or display from the screen and returns you
to TV viewing.
Will also exit the Guide system.
(0-9) Number
Buttons
Enters channel numbers and time settings
directly though
the remote control.
To enter a two-digit
channel, press
the two digits. To enter a three-digit
channel, press and hold the first
digit until #-- appears, then add the second two. Example: to tune to
channel
123, press and hold 1 until 1-- appears then press 2 and 3.
WHO.INPUT
In TV mode, press to toggle through
the available
input
sources VID1/SVID1, VID2/COMP2, previous channel and FRNT (front
panel jacks). In SAT mode, press to select available
channel lists.
ANTENNA
Functions as TV/VCR button
in VCR mode and TV/receiver
button
in SAT.CABLE mode.
REVERSE, PLAY, FORWARD, REC.VCR+, STOP, PAUSE If programmed,
provides transport
control for some remote-controllable
VCRs, DVD
players, laserdisc players, tape decks, and CD players. Pressing REC.VCR+
when using the GUIDE Plus+ Gold System sets the VCR to record a
program.
PIP (Picture-In-Picture)
Brings up the small picture-in-picture
window.
Press again to remove the PiP window.
When PIP Caption
Display -
Alternate
with
PIP - has been selected, will toggle
between
PiP on, PiP
on with closed captions, and PiP off.
SWAP Swaps the main picture with the PIP window.
CH CTRL
Selects the picture window,
(that is, the main or PIP window)
to be changed by the CH ^ (channel up) or CH v (channel down) buttons.
RESET Resets picture quality controls to the Bright Lighting
Picture
Control
Preset. Point and select to choose a different
Picture Control
Preset.
ACCESSING
THE
VIDEO
INPUT
Use the WHO*INPUT
button
to scroll through
the available
input
channels and view components
you have connected
to the TV.
1.
Press TV to place the remote in TV mode. Make sure that the
component
you want to view is turned ON.
2.
Press WHO.INPUT
to tune to an available
input channel.
3.
Continue
to press the WHO.INPUT
button
to scroll through
the
channels.
I
•
Modes of Operation
Because this universal remote can control
several different components (DVD
player, VCR, Cable Box, etc.) it uses
operational modes triggered by the
component buttons. For example if you
want the remote to control the TV, you
would press the TV button to put the
remote into TV mode before you could
control the TV,
23
Advertisement
Table of Contents
