Table of Contents
Advertisement
THE
BASIC CONNECTION
The basic connection
below (TV and VCR) is the most common
connection
and is therefore
used to illustrate
a single component
connection
with your TV. For better sound and picture quality
and
multiple
component
connection
information
refer to the next section,
Advanced
Connections.
Cables
You will use the following
cable to make your
connection:
Coaxial
Cables: These cables carry both the audio and video signal to
the TV from an antenna, cable, or cable box. In this connection,
a second
Coaxial Cable carries the signal through
the VCR to the TV.
FROM CABLE, CABLE BOX, OR ANTENNA
VCR 1
TV
_N FRQM ANT CH3
I
OU_
OUT'TO
I_V
CH4_
VIDEO
AUDIO
_1
I
\
INPUT 2
G LI_K
_III1
/
J
How to View the VCR
To watch the VCR in this connection
tune TV to
Channel 3 or 4.
Later, in the Interactive
Setup section you will
program
the TV to automatically
tune to Channel 3 or
4 when you turn on the VCR.
Once you have completed
this connection
go to "Step 3:
Connect the G-LINK Cable" on page 9.
5
Advertisement
Table of Contents
