RCA PTK195 User Manual page 8

Thomson
Hide thumbs Also See for PTK195:
Table of Contents

Advertisement

ADVANCED
CONNECTIONS
Advanced
connections
give you better sound and video by separating
the audio and video signals and enable you to connect multiple
components.
This section describes the types of inputs available
on the back of your
TV and suggests ways you can use them for optimum
performance.
Once you have made your connections
you will want to program the TV to tune
to the correct Video INPUT channel in
order to see and hear audio and video
from the component. You will program
this later in the Interactive Setup.
Back of the TV
The diagram
below describes each of the back panel jacks. When
connecting
A/V cables, be sure to connect corresponding
OUTPUTS and
iNPUTS (Video to Video, Right Audio to Right Audio, etc.).
Input
1
Connect any of the following
components:
• VCR
• Internet
Access Device
• Laserdisc Player
• DVD Player
• Satellite
Receiver
To view the component
connected
to Input 1:
Use the WHO•INPUT
button
on the remote.
S-Video
This optional
connection
can be
used for better
video quality
picture.
Input
2 (VIDEO or Y P8 P.)
Connect any of the following
components
to INPUT 2:
• VCR
• internet
Access Device
• Laserdisc Player
• DVD Player
• Satellite Receiver
The Y, PB, PRjacks are used in place of the VIDEO jack to connect
an optional
component
video source, such as a DVD playen
Unlik_
a single video input, the Y, PB,PRjacks maintain
the video signal as
three separate signals through
these three jacks. To ensure
maximum
picture quality, use three video-grade
cables for the Y,
P_, and PRconnections.
To View the component
connected
to Input 2:
Use the WHO•INPUT
button
on the remote.
/
/
Connect to an audio receiver|
Takes the signal input from a cable,
or amplifier
for variable
l
cable box, or an off-air
antenna.
Can
controlled
or fixed level
|
also be used for basic component
stereo output.
J
• connections.
• External
Speaker
Jacks •
Use to connect external
speakers for surround
sound. Make sure the
Speaker Selection is set
to EXTERNAL.
G-LINK
Connect the G-LINK
cable for one-
button
recording
and channel tuning
from the Guide.
6

Advertisement

Table of Contents
loading

Table of Contents