Using Point And Select; Entering Setup - RCA P60828 User Manual

USING POINT AND SELECT
You only need to know one rule when using the remote to access on-
screen menus and control panels: point and sele_:t. The point and select
method has two steps.
1. Point to a menu item using the MOVE arrows on the remote.
To point up or down, press the up or down arrows. To point left or
right, press the left or right arrows.
2. Select a menu item by pressing OK.
Selecting an item tells the TV's menu system to go ahead and make
the change or go to a place you have indicated.
ENTERING SETUP
The first screen of the interactive Setup appears automatically when
you turn on your TV for the first time or after a power outage.
Point and Select
buttons
1. Press MENU to begin setup or CLEAR to exit,
You can also access the Interactive Setup through the Main menu:
1. Press MENU to bring up the Main menu.
2.
Point to Setup and press OK. The first Setup screen comes up, asking
you to confirm that you want to begin.
You can also select a menu item by
entering the item number with the
number buttons on the remote.
Press CLEAR at any time to remove all
displays from the screen and return to TV
viewing.
Many VCR user manuals refer to a
PROGRAM button. The MENU button on
this remote works as a PROGRAM button
in VCR mode. Other manuals may refer to
a SELECT button. The OK button on this
remote works as a SELECT button.
12