A Udio/Video In Jacks - RCA CC632 User Manual

Playback on TV (or VCR) with A UDIO/VIDEO IN Jacks
TO connect your camcorder to a TV monitor (or VCR) withAUDIO/VIDEO IN jacks,
you will need an optional audio/video cable such as VH83 shown on page 54.
If your TV is already connected to a VCR, you can attach the camcorder to the VCR
and watch what the camcorder is recording or playing on the TV.
Back of
M_cnhVnCit R°r @White AudioNideo
Auoio Plug Out'-put"(:aMe
_ (Optional)
______ / AUDIO Jack
(_) Yellow Video Ping @,_:: ......... ._.
OR --
Back of @White
Stereo VCR or Y-Adapter Audio Audio/Video
TV Monitor (Optional) Plug Output Cable
_ l (Optional) ..'"
-ellow Video Plug
VIDEO Jack
Installation
(_) Attach the white plug on one end of
the audio/video cable to the AUDIO
IN jack on the TV (or VCR).
Notes: If your cable does nothave white
and
yellow plugs, just
be sure to attach the
same color to the audio jacks•
If your TV (or VCR) has stereoAUDlO IN
jacks, attach the plug to the one labeled
MONO. If one is not labeled MONO, you
may need a Y-adapter, such as AH25,
shown on page 54 to hear both channels.
(_) Attach the yellow plug to the VIDEO
IN jack on the TV (or VCR).
(_ Attach the white plug on the other end
of the audio/video cable to the AUDIO
jack (located under the small cover)
on the back of the camcorder.
(_) Attach the yellow plug to the yellow
VIDEO jack on the camcorder.
48 (continued on next pagc)