Tape Time-Remaining; Display - RCA CC632 User Manual

RecoPding ....... ............... _, , _j................,_,_,_ _,_,,,_,._ , ,,_ , ,_ _ :_ J_>:::_o:_:_ ,_® 0_ _....
Tape Time-Remaining Display
The approximate time remaining on the tape in the camcorder is automatically
displayed in the viewfinder. The SP'SLP/T20"30"40 switch must be set for the correct
recording speed and tape length before the camcorder can correctly calculate time
remaining.
30_IN-
I
29MIN
i
I
I
2MIN
(Flashing)
I
IMIN
4_ashing}
0MIN
I
30MIN T30
3APE END
Time Counter With
Memory Stop Turned On
SP.SLP/T20"30"40
Switch
Set the Recording Speed and Tape
Length
Before recording, repeatedly press the
SP.SLP/T20.30.40 switch to select the
recording speed and length of tape you
are using.
• Select T20 SP if you are using a tape
with 20 minutes or less recording time
and want to record in SP speed.
• Select T20 SLP if you are using a tape
with 20 minutes or less recording time
and want to record in SLP speed.
• Select T30 SP if you are using a tape
with 30 minutes recording time and
want to record in SP speed.
• Select T30 SLP if you arc using a tape
with 30 minutes recording time and
want to record in SLP speed.
• Select T40 SP if you are using a tape
with 40 minutes recording time and
want to record in SP speed.
• Select T40 SLP if you are using a tape
with 40 minutes recording time and
want to record in SLP speed.
Notes: The time-remaining indicator will
start flashing when the remaining tape time
reaches two minutes.
TAPE END appears when the tape reaches its
end during recording or a cassette is loaded
whose tape is already at its end.
28