Table of Contents
Advertisement
Creating Your Own Title
After you create a title you can store it and record it alone or with one of the
preset titles as described
on pages 42-43.
The clock cell battery must be
installed
as shown
on the next page.
1. Place POWER
switch in CAMERA.
Power indicator
will light.
2. Make sure the scene selectAE
dial is
not set to AUTO.
3. Press MODE
until []
DISP. appears
in the viewfinder.
4. Repeatedly
press F2 to display SET
CHAR (or a title you have previously
stored) in the viewfinder.
5. Press SET.
The CHARACTER
SET
MODE menu appears with a flashing
cursor.
Notes: To leave a blank space, select the
blank space in front of "A."
Press and hold the button to rapidly
advance the flashing cursor.
7. Press SET to select the character.
8. Repeat steps 6 and 7 until you have
selected up to 18 characters for a title.
TAYLOR
WAYNE
CHARACTER
SET
MODE
K
L
R
0
P
Q
R
S
T .u y _ .x Y z '_ _ u
A E I
0
U fi R €
_ &
:
.
•
'
/
!
'?, & W'
0123456789
\/
_l/_x_O000000000000000
•
6. Repeatedly press DATE/TIME/CHAR
+ or - until the first character for your
title is flashing.
9. Repeatedly
press SET to store the title
and remove the CHARACTER
SET
MODE
menu from the viewfinder.
Notes: Only one title can be stored. To
create a new title, store it over the old one.
To erase a character or title, select the
blank space in front of the "A" for each
character you want to erase.
39
Advertisement
Table of Contents
