Using Adapter/Charger - RCA CC632 User Manual

Using the Adapter/Charger to Power Your Camcorder
The power connector attaches to the camcorder and lets you power your camcorder
directly from standard household power. The adapter/charger operates on 100-240
volts, 50/60 Hz, so it can be used virtually anywhere in the world to power the
camcorder or recharge the battery.
To AC 100-240V,
50/60 Hz
Power Connector
POWER
Indicator
DC OUT Jack
BA TT. RELEASE Button
Attach Adapter/Charger
1. Plug power connector's plug into DC
OUT jack on adapter/charger.
2. Align the reference mark on the power
connector with the mark on the
camcorder. Hold the top of the power
connector flush against the back of the
camcorder, and press the bottom of
the power connector onto the
camcorder until it locks into place.
3. Plug the adapter/charger's plug into
the nearest AC outlet (100-240V,
50/60Hz).
4. If the adapter/charger is properly
connected, its POWER indicator will
light.
Caution. Donot usethis
:Sdapter/charg_¢for any other: !i
purpOs_ other tha_
FBi260 orFB!20 battery pack
_upplyingpower to the eamcorder;
Remove Adapter/Charger
1. Unplug the adapter/charger from the
wall outlet.
2. Press and hold BATT. RELEASE on
the camcorder while removing the
power connector.
Using an Optional Plug Adapter
An optional plug adapter may be required
in some countries.
Optional AC
d
Plug Adapter/'' AC 100-240V
1. Plug the adapter/charger's plug into
the AC plug adapter.
2. Plug the AC plug adapter into the
AC outlet.
11