Table of Contents
Advertisement
(_ Cassette Warning
• The _
indicator flashes when the
POWER
switch is set to CAMERA
and the safety tab has been
removed
from the cassette.
• The _
indicator
also flashes
when the POWER
switch is set to
CAMERA
and there is no cassette
in the camcorder.
(_
Time Remaining, Tape Length
and Tape Speed (SP or SLP)
Time Remaining: The approximate
time remaining on the tape in the
(_
camcorder is automatically
displayed. The correct tape length
must be set.
• The time-remaining indicator will
start flashing when the remaining
tape time reaches two minutes.
• Details are onpage 28.
Tape Length:
The length of the
tape in the camcorder (T20, T30, or
T40) selected with the SP•SLP/
T20.30.40 switch appears here.
• Details are on page 28.
Recording Speed: The recording
speed (SP or SLP) selected with the
SpoSLP/T20o30.40 switch appears
here.
@
• Details are on pages 16 and 28.
Elapsed Time-Counter with
Memory Stop
• The time counter appears during
playback. It is not recorded on the
tape.
• An "M" appears in front of the time
counter when memory-stop
is on.
• Details
are onpage
27.
Scene Select AE
• The indicator for the mode selected
with the scene selectAE
dial
appears
here.
• The indicator
and mode both
appear briefly when the mode is
selected,
and then only the
indicator appears.
• Details are on page 29.
LENS COVER
When you turn on the camcorder,
this indicator briefly flashes to
remind you to open the lens cover.
Manual Focus
• Manual Focus Indicators
(A
_a)
appear when focus is adjusted
manually.
• Manual Focus Lock Indicators
(,,)
appear when manual focus is
locked.
• Low-Contrast Indicators ( *"_
)
flash when the auto-focus system
cannot focus properly.
•Details are on pages 34-35.
Lithium Cell ( _ )
• This indicator appears when the
clock cell has not been installed or
it needs to be replaced.
• Details are on page 40.
(continued on next page)
23
Advertisement
Table of Contents
