Table of Contents
Advertisement
Inserting and Removing
Cassettes
EJECT Button
Tape
Wheel
PUSH
Here to
Close
Cassette
Compart-
ment
Safety
Tape
Window
Before inserting a cassette, turn the tape
wheel on the side of the cassette in the
direction shown to remove any slack in
the tape.
1. Attach a power supply. Then slide and
release EJECT to open the cassette
compartment.
2. Insert or remove the cassette.
3. Close the cassette compartment
door
by pressing
on the area labeled PUSH
until it locks into place.
Cassette Care and Storage
• When you are finished with a cassette,
• Keep dust from entering the cassette
rewind it, remove it from the
camcorder, and label it.
• Store cassettes
vertically
in their
protective
cases at normal room
temperatures.
Do not leave your
camcorder
or cassettes
in a car or
outdoors
for an extended
period.
Excessive
heat or cold may damage
your cassettes.
• Keep the cassette away from strong
magnetic
fields such as electric motors
and other devices.
compartment.
All dust is abrasive and
will cause excessive wear on the tape
and the camcorder's recording or
playback heads.
Do not use cassettes with damaged or
spliced tape.
Do not use a cassette if it has been
damaged or exposed to moisture. The
tape may jam and/or damage your
camcorder.
17
Advertisement
Table of Contents
