Chapter Three; Operating Your Vcr; Setting Up Your Vcrfor The First Time; Older Tv - Mitsubishi HS-U420 Owner's Manual

A
CHAPTER THREE Operating Y ourVCR
Now that you've completed your antenna, VCR, and TV connec-
tions, you're ready to start enjoying your equipment. To get the
most satisfaction out of your VCR, you shoul5 carefully read the
two sections, "Setting Up Your VCR for _he First Time" and
"Viewing the Picture Coming from Your VCF." Then you can start
exploring what your new VCR can do.
In this chapter, you'll learn:
+ Setting Up Your VCRfor the First Time
$ Usingthe RemoteControl
+ Viewing the PictureComingfrom Your VCR
$ Loadingand UnloadingTapes
+ Playinga Tape
$ Selecting the On-screen Language
+ Using the Menusto Set the Time
$ Programming the VCRto Receive TV Channels
Using the Audio and Video Functions
$ Recording
I Setting Up YourVCR for the First Time
It's important that your VCR is set up correcti[y before you try to
use it. If you carefully read this section, you will avoid confusion
later and get the most out of operating your system.
This section teaches you about.:
• Setting up your VCR if you are using a I'V without Audio
and Video Inputs (Older TV), and
• Setting up your VCR if you are using a 'IV equipped with
Audio and Video Inputs (Modern TV).
Beforeyou begin,you should:
• have completed your anl;enna, VCR, and TV connections.
Setting up your VCR ifyou are using a TV withcut Audioand Video
Inputs(OlderTV)
O Turn on your TV and tune it to channel
3 (,r 4, whichew_r
is
NOT used for broadcast in your area.
17