Chapter Three; Operating Yourvcr; Setting Up Yourvcr For The First Time; Setting Up Your Vcr If You Are Using A - Mitsubishi HS-U130 Owner's Manual

,_ CHAPTER THREE
Operating YourVCR
Now that you've completed your antenna, VCR, and TV connec-
tions, you're ready to start enjoying your equipment. To get the
most satisfaction out of your VCR, you should carefully read the
two sections, "Setting Up Your VCR for the Fi rst Time" anti
"Viewing the Picture Coming f_om Your VCR.:' Then you can start
exploring what your new VCR can do.
In this chapter, you'll learn:
0 Setting Up YourVCR for the First Time
Using the Remote Control
$ Viewing the Picture Comingfrom YourVCR
Loading and UnloadingTapes
Playing a Tape
$ Selectingthe On-screenLanguage
Using the Menusto Programthe VCRto Receive TV Channels
0 Setting the Clock
Using the Audio and Video Functions
Recording
FirstTime
SettingUp YourVCRfor the
It's important that your VCR is set up correctly before you try to
use it. If you carefully read this section, you will avoid confusion
later and get the most out of operating your system. This section
teaches you about:
• Setting up your VCR if' you are using _ TV equipped with
Audio and Video Inputs (Modern TV), and
• Setting up your VCR if you are using _ TV without Audio
and Video Inputs (Older TV).
Beforeyoubegin,you should:
• have completed
your antenna, VCR, and TV connections.
Setting up your VCR if you are using a TV equippedwith Audio
and Video Inputs(ModernTV)
0
Turn on your TV and switch it to the con'ect external input.
(For most Mitsubishi TVs, this means pressing the T_'s
INPUT button until you see the words =Ext-l" or "Input-l" on
the screen.) If you do not have a Mitsubi,;hi TV, please refer to
your TV instruction book for this procedure.
Turn the VCR on by pressing the POWER button.
17