Maytag MVWC400XW4 Use And Care Manual page 15

TROUBLESHOOTING
First try the solutions suggested here or visit our website to possibly avoid the cost of a service call... -_
In U.S.A. www.maytag.com/help - In Canada www.maytag.ca
ff you experience Possible Causes So[ution
Add an Extra Rinse to the selected cycle.
Sand, pet hair, lint, etc.
on load after washing
Load is tangling
Heavy sand, pet hair, lint, and
detergent or bleach residues
may require additional rinsing.
Washer not loaded as recommended.
Not cleaning or Wash load not completely
removing stains covered in water.
Added more water to washer.
Washer not loaded as recommended.
See "Using Your Washer" section.
Select a cycle with a slower wash action and spin speed, however
items will be wetter than those using a higher speed spin, See the
"Cycle Guide" to match your load with the best cycle,
Load garments in loose heaps evenly around the washplate, Do
not load garments directly over the center of the washplate,
Reduce tangling by mixing types of load items, Use the
recommended cycle for the type of garments being washed,
Washer senses load size and adds correct amount of water. This is
normal and necessary for clothes to move,
Do not add more water to washer, Adding water lifts the garments
off the washplate, resulting in less effective cleaning,
Washer is less efficient at cleaning when tightly packed,
Load garments in loose heaps evenly around the washplate, Do
not load garments directly over the center of the washplate,
Add only ] or 2 additional garments after washer is started,
Adding detergent on top of load. Add detergent, oxi products and color-safe bleach to the bottom of
the basket before adding the load items.
Not washing like colors together. Wash like colors together and remove promptly after the cycle is
complete to avoid dye transfer.
Not using H E detergent or using too
much HE detergent,
Not using correct cycle for fabric type.
Not using dispenser or Downy BaIP,
The suds from regular detergent can keep washer from
operating correctly,
Use only HE detergent, Be sure to measure correctly,
Always measure detergent and follow manufacturer's directions
based on load size and soil [eve[,
Use a higher soil level cycle option and warmer wash
temperature to improve cleaning,
Use Heavy Duty Heavy and Heavy Duty Regular cycle for tough
cleaning. See the "Cycle Guide" to match your load with the best
cycle.
Use dispenser for chlorine bleach and Downy Ball °'_ for fabric
softener to avoid staining.
Load dispenser before starting a cycle.
Do not add products directly onto load.
Not selecting Fabric Softener Always select "Yes" when adding fabric softener. Cycles that use
Added-Yes. spray rinsing will add additional water for proper fabric softener
dispensing when "Yes" is selected,
Incorrect dispenser Clogged dispenser. Use only liquid chlorine bleach in the bleach dispenser.
OP eration .j
15