Maytag Perfoma MGRH752BDS Use & Care Manual page 24

Nelntenence
Oven Door
Leveling Legs
To remove:
1. When cool, open the oven door to
the first stop position (opened
about four inches:).
2. Grasp door at each side. Do not
use the door handle to lift door.
3. Lift up evenly until door clears
hinge arms.
F_
Be sure the range should be leveled when II/] (_
installed. If the range is not level, turn the ]] [L[ ,I
leveling legs (located at each corner of the )1_. _
range:) until range is level. _i_/
\ LEVELING LEG
Oven Light
To replace:
1. Grasp door at each side.
2. Align slots in the door with the hinge arms on the range.
3. Slide the door down onto the hinge arms until the door is
completely seated on the hinges. Push down on the top
corners of the door to completely seat door on hinges.
Door should not appear crooked.
i Note: The oven door on a new range may feel "spongy"
when it is closed. This is normal and will decrease with use.
Oven Window
To protect the oven door window:
1. Do not use abrasive cleaning agents such as steel wool
scouring pads or powdered cleansers as they may scratch
the glass.
2. Do not hit the glass with pots, pans, furniture, toys, or other
objects.
3. Do not close the oven door until the oven racks are in
place.
Scratching, hitting, jarring or stressing the glass may weaken
its structure causing an increased risk of breakage at a later
date.
23
To Replace Oven Light Bulb:
1. When oven is cool, hold bulb cover in place, then slide wire
retainer off cover. NOTE: Bulb cover will fall if not held in
place while removing wire BULBOOVER
retainer.
2. Remove bulb cover and
light bulb.
3. Replace with a 40-watt
appliance bulb. RETA_N_
4. Replace bulb cover and secure with wire retainer.
5. Reconnect power to range. Reset clock.