Table of Contents
Advertisement
REMOTE
CONTROL
OPERATION
(MODELS
PT-47WX42,
PT-53WX42
AND
PT-E6WX42)
Programming
The
Remote
The Universal Remote Control can be programmed to operate many manufacturers' components, using the component
function buttons for VCR, DVD, CABLE or DBS. Follow the procedures for programming your Remote Control with or
without a code for the component.
Default Modes For Remote Control
m]'___"rJ
t__
=B]'F__IF:R
Im]_,dFJlrJ
11
TM
"IV (Panasonic Only)
Panasonic TV Codes
VCR
VCR (Preset)
Panasonic VCR Codes
DBS
DBS (Preset)
Panasonic DBS Codes
CABLE
CABLE (Preset)
Panasonic DBS Codes
DVD
DVD, CD (Preset)
Panasonic DVD Codes
Determine the manufacturer
of the component and look in the table for the code.
Programming
With a Code
Procedure
Confirm that the external component is plugged in and operating.
Turn the component off.
ACTION
0
Press
_,
and
together, for at least 5 seconds.
Press appropriate component button on the Remote Control VCR, DVD, CABLE or DBS.
Enter the 3-digit component code using the Remote Control numeric keypad (0 - 9 buttons).
Press the Remote Control O
to test the component. If the procedure was successful, the component
will
turn
on.
_
Unsuccessful Code
1
_ith
the Remote Control, repeat]
Ithe procedure using another code. (Some brands
have multiple/
I codes).
L
I If an incorrect code is entered, or if the procedure takes longer thanl
[ 30 seconds, the programming will fail.
]
Programming
Without
A Code
This procedure
searches all codes and is called the "sequence
method."
Confirm that the external component is plugged in and on.
Turn the component off,
ACTION
Press
O
and _--_
together, for at least 5 seconds,
v
Press appropriate
component button on the Remote Control.
Press VOL_
to move forward to the next code. Press <_ VOL to move backward.
Press the Remote Control _
to test the component. If the procedure was successful, the component will turn on.
Note:
Repeat the above steps until the component
code is found. It may take many attempts before the correct code
is found.
ACTION
After the code is found, press
(_
to store the code.
19 •
Advertisement
Table of Contents
