Table of Contents
Advertisement
OPTIONAL
EQUIPMENT
CONNECTIONS
VCR and Cable Box Connection
(Contd.)
Recording
a premium
(scrambled)
cable
channel
Procedure
1.
Select ANT2 in the SET UP menu under Prog Chan.
2.
Press the TMNIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2, etc.) connected to your VCR.
3.
Turn the VCR ON.
4.
Tune the VCR to Channel 3 or 4, depending on the switch setting on the back of VCR.
5.
Using your cable box, tune to the premium cable channel you want to record.
6.
Begin recording.
Note:
To view a different channel while recording:
Select ANT1 in the SET UP menu under Prog Chan.
Press the W/VIDEO
button on the remote control to TV mode.
Tune the television to a television program (except another premium cable channel).
Amplifier
Connection
(TO AUDIO AMP)
To listen through a separate stereo system, connect an external audio amplifier TO AUDIO AMP outputs on back of television.
Note:
TO AUDIO AMP terminals cannot be connected directly to external speakers.
Audio
Adjustments
1.
Select SPEAKERS ON located in the onscreen AUDIO menu.
2.
Set amplifier volume to minimum.
3.
Adjust television volume to desired level.
4.
Adjust amplifier volume to match the television.
5.
Select SPEAKERS
OFF & VARIABLE AUDIO OUT from AUDIO menu.
6.
Volume, mute, bass, treble and balance are now controlled through the television.
Note:
Select SPEAKERS
OFF & FIXED AUDIO OUT to control audio functions through the extema/ amplifier.
r-
--
_
.
ANT t
._PLIT OUT
O
ANT2
L
--
--
-J
r
CONNECTIONS
ON BACK OF TV
O
o.Q Q Q ® ® ®v,o,o
%oQ ® ® ® ®
1
2
INPU T _NPUT INPUT
PROG
T O
COMPONENT
_
2
3
OUT
AUDIO
VIDEO
INPUTS
AMp
-1
CABLES NOT SUPPLIED
External Amplifier
Front Control
Panel
The front control panel can be used to access menus and switch video mode when the remote control is not available.
ONIOFF INDICATOR
Note:
The ON/OFF indicator LED (red) will be lit when set is on.
k
......................................... I
•
I
CAMCORDER
POWER ONIOFF
T
Note: The S-VIDEO connection provides higher quality picture. It
overrides VIDEO 4 connections.
Use INPUT 4, AUDIO L
_'-_=
and R with S-VIDEO connection.
A second VCR, Camcorder, a video disc player, video game equipment or DSS equipment can also be connected to the
video inputs. See the optional equipment manual for details.
Procedure
1. Connect equipmentto front AudioNideo inputjacks.
2.
Press "IV/VIDEO button to select VIDEO 4 input mode.
3.
Operate optionalequipmentas instructedin equipmentmanual.
10e
Advertisement
Table of Contents
