Table of Contents
Advertisement
HOW TOUSE AN IFIT:COM PROGRAM
DIRECTLY FROM OUR WEB SiTE
To use programs from our Web site, the treadmHUmust
be connected to your home computer, See HOW TO
CONNECT YOUR COMPUTER on page 18, in
addition, you must have an internet connection and
an internet service provider, A Hstof specific system re-
quirements is found on our Web site,
Follow the steps bebw to use a program from our
Web site,
insert the key into the consote.
See HOW TO TURN ON THE POWER on page 11,
Select the iFIT.com mode.
See step 2 on page 19,
Go to your computer
and start an internet
connection.
Start your web browser,
if necessary,
and go to
our Web site at wwwJFIT.com.
Fottow the desired tinks on our Web site to se-
lect a program.
Read and follow the on-line instructions for using a
program,
Follow the on-line instructions
to start the
program.
When you start the program, an on-screen count-
down will begin,
Return to the treadmill and stand on the foot
rails. Find the clip attached to the key and stide
the clip onto the waistband
of your clothes.
When the on-screen countdown ends, the program
will begin and the walking belt will begin to move,
Hold the handrails, step onto the walking belt, and
begin walking, During the program, an electronic
"chirping" sound will alert you when the speed
and/or incline of the treadmill is about to change,
CAUTION: AJways listen for the "chirp"
and be
prepared for speed and/or incline changes.
if the speed or incline settings are too high or too
low, you can manually override the settings at any
time by pressing the Speed or Incline buttons on
the console, However, when the next "chirp"
is
heard, the speed and/or incJine wilt change to
the next settings for the program.
To stop the walking belt at any time, press the
Stop button on the console, The time wiii begin to
flash in the Time/Pace display, To restart the pro-
gram, press the Start button or the Speed in-
crease button, After a moment, the walking belt
will begin to move at 1,0 mph, When the next
"chirp"
is heard, the speed and incline will
change to the next settings of the program,
When the program is completed, the walking belt
will stop, Note: To use another program, press the
Stop button and go to step 5,
Note: if the speed and/or incline of the treadmill
does not change when a "chirp"
is heard, make
sure that the iFIT indicator
is lit and that the
time is not flashing
in the Time/Pace dispJay. In
addition,
make sure that the audio came is
property connected.
Follow your progress
with the matrix and the
displays.
See step 5 on page 11,
When you are finished
exercising,
remove the
key from the consote.
See step 7 on page 15,
21
Hide quick links:
Advertisement
Table of Contents
