To Use The Maintenance Mode; Update The Console Firmware; Calibrate The Incline System Of The Treadmill/Speed Of The Treadmill; View Machine Information - NordicTrack Commercial 1750 User Manual

HOW TO USE THE MAINTENANCE MODE 4. Calibrate the incline system of the treadmill.
The console features a maintenance mode that allows
you to update the console firmware, calibrate the in-
cline and speed of the treadmill, view technical infor-
mation, and perform a network test.
1. Select the settings main menu.
See step 1 on page 25.
2. Select the maintenance mode.
In the settings
main menu,
touch the
Maintenance
button to enter
the mainte-
nance mode.
MAINTENANCE
The maintenance mode main screen will show in-
formation about the model and version of the
treadmill.
3. Update the console firmware.
For the best results, regularly check for
firmware updates.
Touch the Firmware Update button to check for
firmware updates using your wireless network. The
update will begin automatically.
To avoid damaging the treadmill, do not turn
off the power or remove the key while the
firmware is being updated.
Note: If you cannot update the console firmware
over your wireless network, you can update the
firmware using a USB drive. Go to www.iFit.com
and download the latest firmware update onto your
USB drive. Safely remove the USB drive from your
computer and plug it into the USB port on the side
of the console. If the console is in the iFit Live app,
the update should begin automatically.
The screen will show the progress of the update.
When the update is complete, the treadmill will turn
off and then turn back on. If it does not, press the
power switch into the off position. Wait for several
seconds, and then press the power switch into the
reset position. Note: It may take a few minutes for
the console to be ready for use.
Touch the Calibrate Incline button. Then, touch the
Begin button to calibrate the incline system. The
treadmill will automatically rise to the maximum in-
cline level, lower to the minimum incline level, and
then return to the starting position. This will cali-
brate the incline system. Press the Cancel button
to return to the maintenance mode. When the in-
cline system is calibrated, touch the Finish button.
iMPORTANT: Keep pets, feet, and other objects
away from the treadmill while the incline system
is calibrating. In an emergency, pull the key
from the console to stop the incline calibration.
5. Calibrate the speed of the treadmill.
Calibrate the speed of the treadmill only if in-
structed to do so by an authorized service
representative.
Note: The Calibrate Speed button may not be en-
abled on your treadmill.
6. View machine information.
Touch the Machine Info button to view information
about your treadmill. After you view the informa-
tion, touch the back button on the screen.
7. Perform a network test.
Touch the Network Test button to check the con-
nection status of the treadmill. The wireless inter-
face status shows whether the wireless feature on
the treadmill is turned on or turned off. The network
access status shows whether the treadmill can
connect to your wireless network. The DNS service
status shows whether the treadmill can communi-
cate with the DNS server. The iFit.com status
shows whether the treadmill can communicate with
iFit.com. After you view the information, touch the
Finish button.
8. Exit the maintenance mode.
To exit the maintenance mode, press the back but-
ton on the console.
26