Removing The Wireless Local Area Network (Wlan) Card; Installing The Wlan Card; Removing The Power-Supply Fan - Dell Optiplex 9010 All In One Owner's Manual

Removing the Wireless Local Area Network (WLAN) Card

1. Follow the procedures in
2. Remove the:
a) VESA stand
b) back cover
c) VESA mount bracket
d) system-board shield
3. Disconnect the WLAN cables. Remove the screws that secure the WLAN card to the system board. Remove the
WLAN card from the connector.

Installing the WLAN Card

1. Align and place the WLAN card on the connector.
2. Tighten the screws to secure the WLAN card to the system board.
3. Connect the WLAN cables.
4. Install:
a) system-board shield
b) VESA mount bracket
c) back cover
d) VESA stand
5. Follow the procedures in

Removing the Power-Supply Fan

1. Follow the procedures in
2. Remove the:
a) VESA stand
b) back cover
c) VESA mount bracket
d) system-board shield
3. Remove the screw that secures the fan bracket to the chassis. Lift the fan bracket away from the computer.
Before Working Inside Your Computer .
After Working Inside Your Computer .
Before Working Inside Your Computer .
21