Installing The Intrusion Switch; Removing The Wireless Local Area Network (Wlan) Card - Dell OptiPlex 9010 Mini-Tower Owner's Manual

Installing the Intrusion Switch

1. Insert the intrusion switch into its place in the chassis rear and slide it towards the top to secure it.
2. Connect the intrusion cable to the system board.
3. Install the cover.
4. Follow the procedures in

Removing the Wireless Local Area Network (WLAN) Card

1. Follow the procedures in
2. Remove the cover.
3. Remove the screws that secure the antenna puck to the computer. Pull the antenna puck from the computer.
4. Press the blue tab and lift the latch outwards.
After Working Inside Your Computer .
Before Working Inside Your Computer .
9