Option
Table 9. Wireless
Option
Wireless Switch
Wireless Device Enable
Table 10. Maintenance
Option
Service Tag
Asset Tag
SERR Messages
Table 11. Image Server
Option
Lookup Method
ImageServer IP
Description
•
Trusted Execution - This option is disabled by default.
Description
This option determines which wireless device can be controlled by the Wireless
Switch.
•
WWAN
•
WLAN
•
Bluetooth
This option allows enabling/disabling of internal wireless devices.
•
WWAN
•
WLAN
•
Bluetooth
Description
Displays the service tag of your computer.
Allows you to create a system asset tag if an asset tag is not already set. This option
is not set by default.
Controls the SERR message mechanism. Some graphics cards require that the SERR
message mechanism be disabled.
•
Enable SERR Messages (selected by default)
Description
Specifies how the ImageServer looks up the server address.
•
Static IP
•
DNS (selected by default)
NOTE: This field is only relevant when the Integrated NIC control in the System
Configuration group is set to Enabled with ImageServer.
Displays the primary static IP address of the ImageServer with which the client
software communicates. The default IP address is 255.255.255.255.
NOTE: This field is only relevant when the Integrated NIC control in the System
Configuration group is set to Enabled with ImageServer and when Lookup
Method is set to Static IP.
51