Table of Contents
Advertisement
TV+cable
with
a decoder
box
equipment
you will need
Use this hook-up if you need a decoder
box to descramble
cable
signals.
This hook-up will allow you to use the remote
control
to
change
channels:
To complete
the hook-up,
you will need:
•
1 two-way
splitter,
and
OUT
OU
•
3 lengths
of 75 ohm coaxial
cables.
procedure
(Please
see illustration
on the following
page.)
O Connect
the incoming
cable to the IN terminal
on the two-way
splitter.
O Connect
a coaxial cable to one of the OUT terminals
on the same
splitter;
connect the other end of this cable to the ANT-A termi-
nal on the back of the TV.
Connect
the second coaxial cable to the second OUT terminal
on
the same splitter;
connect tlhe other end of this cable to the IN
terminal
on the decoder box.
O Connect
the third coaxial cable to the OUT terminal
on the back
of the decoder
box, and the other end of this cable to the ANT-B
terminal
on the back of the TV.
Basic Connections
31
Hide quick links:
Advertisement
Table of Contents
