Table of Contents
Advertisement
TV+VCR+cable
with
a decoder
box
(cont.)
_Important:
_Important:
_Important:
procedure
(Please
see illustration
on the following
page.)
0
0
Connect
the incoming
cable to the IN terminal
on tl_.e two-way
splitter.
Connect
a coaxial cable to one of the OUT terminals
on the
splitter;
connect the other end of this cable to the ANT-A termi-
nal on the back of the TV.
O Connect
a second coaxial cable to the other OUT terminal
on the
splitter;
connect
the other end of this c.able to the IN terminal
on
the decoder
box.
O Connect
the third coaxial cable to the OUT terminal
on the back
of the decoder
box; connect the other end of this cable to the
ANTENNA-IN
terminal
on the back of the VCR.
Connect
the fourth
coaxial cable to the ANTENNA-OUT
termi-
nal on the back of the VCR. Connect the other end of this cable
to the ANT-B terminal
on the back of the TV.
Connect
an RCA pin-type
video cable to the VIDEO OUT termi-
nal on the back of the VCR. Connect
the other end of this cable
to the VIDEO INPUT
terminal
on tl_e back of the tdevision.
If you are connecting
a Super VHS (S-VHS) VCR, use a Super
Video cable instead
of an RCA pin-type
video cable. Connect
a
Super Video cable to the S-VIDEO
OUT terminal
on the VCR.
Connect
the other end of this cable to tile S-VIDEO INPUT
termi-
nal on the back of the television.
Connect
a set of RCA pin-type
audio cables to the AUDIO OUT
terminals
on the back of the VCR. Use the red cable to connect
the right (R) channel
and the white cable for connecting
the left
(L) channel.
Connect
the other ends of this cable to the AUDIO INPUT
terminals
on the back of the television.
If your VCR is monaural
(non-stereo),
you witl only connect
a single
RCA pin-type
audio cable. Connect
the cable to the VCR, then
connect the other end to the L (LEFT) audio input
on the back of
the television.
If your VCR has a video channel
switch, set it to "OFF/AV." See
your VCR's owner's guide for details.
Begin playing a tape in your VCR.
Select the desired
external
input source (EXT-1 or EXT-2) by
using the INPUT
button
on the control
panel or remote control.
38
Chapter
2 : Connecting
Your TV
Hide quick links:
Advertisement
Table of Contents
