Troubleshooting
(cont.)
Problems
Possible
Solutions
For More
Information
The remote
control
doesn't
work,
•
Check that the batteries
are
installed
correctly.
See "Getting
ready to use
the remote
control"
in
Chapter
1 for an explana-
tion of how to install
batter-
ies in tile remote
control.
Check the select button
is
set to TV.
See "Remote control
but-
tons and functions"
in
Chapter
1, which explains
where
the select buttoa
is
located.
Be sure that you are point-
ing the top of the remote
control toward
the TV from
a distance
of no more than
20 feet.
See "Getting
ready to use
the remote
contror'
in
Chapter
1, which contains
pointers
:for using
the
remote
control.
The TV takes
several
sec-
onds to respond
to button
commands.
Use the ENTER
button
to
avoid delays.
See "Changing
channels"
in
Chapter
3, which explains
the function
of the ENTER
button.
You can't access a channel.
Be sure that the channel
you want to view is pro-
grammed
into memory.
Check that the TV is tuned
to the correct input
source
(antenna)
for that channel.
See "Memorizing
chaanels"
in Chapl;er 3, which explains
how to program
channels
into tile TV's memory.
See "Selecting
the input
source" in Chapter
3_ which
explains
how to change
the
input
source.
96
Chapter
5: Troubleshooting