Table of Contents
Advertisement
procedure
(Please
see illustration
on the following
page.)
O Connect
the incoming
cable or antenna
_o the ANTENNA
][N
terminal
on the VCR.
O Connect
one end of a coaxial cable to the .t_NTENNA
OUT
terminal
on the VCR.
Connect
the other end of the cable to the L_NT-A terminal
on the
TV.
Connect
an RCA pin-type
video cable to the VIDEO OUT termi-
nal on the back of the VCR. Connect
the other end of this cable
to the VIDEO INPUT
terminal
on the back of the television.
_Important:
If you are connecting
a Super VHS (S-VHS) VCR, use a Super Video
cable instead
of an RCA pin-type
video cable. Connect
a Super
Video cable to the S-VIDEO
OUT terminal
on the VCR. Connect
the
other end of this cable to the S-VIDEO
INPUT
terminal
on the back
of the television.
Connect
a set of RCA pin-type
audio cables to the AUDIO
OUT
terminals
on the back of the VCR. Use the red cable to connect
the right (R) channel
and the white cable l_oconnect
the lef_ (L)
channel.
Connect
the other ends of this cable to the AUDIO INPUT
terminals
on the back of the television.
_Important:
If your VCR is monaural
(non-stereo),
you wi:[1 only connect
a single
RCA pin-type
audio cable. Connect
the cable to the VCR, then
connect
the other end to the L (LEFT) audio input
on the back of
the television.
)Important:
If your VCR has a video channel
switch, set it to the "OFF/AV"
mode.
See your VCR's owner's
guide for details.
Set the VCR to the playback
mode.
Select the desired
external
input, source (F,XT-1 or EXT-2) by
using the INPUT
button
on the control
panel or remote
control.
Hide quick links:
Advertisement
Table of Contents
