Adjusting The Sound - Mitsubishi CS-40307 Owner's Manual

Customizing the A/V MemorT position (cont.)
Adjusting the sound
This section contains descriptions tbr each audio setting and
explains how to adjust them for the A!V memory positions.
descriptions of audio functions
The Listen to function allows you to determine how your TV will
receive an audio signal and play back: the sound that you hear. You
can set this function to "Stereo," "S.A.P. ," and "Mono."
• For almost all situations, you should choose Stereo. With this
setting, the TV will play stereo broadcasts in stereo and mono
broadcasts in mono. If a channel is broadcasting in stereo, the
word "Stereo" will display when you tune to that channel.
• Some TV stations will broadcast second audio ]program, or
S.A.P. signal. This signal is an additional soundtrack that you
can't hear during normal TV viewing. An S.A.P. signal might be
related to the program you are watching (e.g., .a soundtrack in a
foreign language), or it might be unrelated (e.g., a weather
report). If a channel is broadcasting an S.A.P. signal, the letters
"SAP" will appear on-screen when you tune to that channel.
Choose "Listen to: SAP" to hear the S.A.P. signal.
• Use the Mono setting if you are receiving a weak audio signal.
This setting will reduce background noise. However, with this
setting, the TV will only play in mono, even if the program you
are watching is in stereo.
The Bass function controls the volume of low frequency sound.
The Treble function controls the volume of high f_equency sound.
The Balance function adjusts the level of sound between the left
and right speakers. Adjust the scale unlfil the sound seems to come
equally from both speakers.
The Surround function creates simulated stereo and surround
effects. You can set this function to ",Off'," "Simulate," or "Hall."
• Select Off if you do not want to use any surround effects.
• Select Simulate if'you are watching' a non-stereo program; your
TV will create a simulated stereo effect.
• Select Hall if you are watching a stereo program; your TV will
create a simulated surround eft_ct, making the sound seem to
extend around and behind you.
The Speaker function allows you to turn the TV's internal speak-
ers on or off.
• Choose On if you want to play the TV's sound through the TV's
built-in speakers.
68 Chapter 3: Operating Your TV