Mitsubishi CS-40307 Owner's Manual page 43

Using the remote control to operate VCRs, cable
boxes and other components (cont.)
using your remote control to operate your Mitsubishi
laserdisc player
After you have set up your remote contrc,1 tbr your laserdisc player,
you can use tile remote to operate the player.
O Use the select switch on the remote control to choose the cable
layer.
Point the remote control at the laserdisc player and press the
desired buttons.
You can use the POWER, CHANNEL, nurrbers (0-9), INFO,
MENU, CANCEL, STOP, PAUSE, REW, PLAY, and FF buttons to
operate your laserdisc player.
using your remote control to operate your Mitsubishi audio
products
After you have set up your remote control tbr your A/V receiver, you
can use the remote to operate it.
O Use the select switch on the remote control to choose the layer
that you set up to operate your receiver: TV or CABLE.
Point the remote control at the A/V receiver and press the
desired buttons.
If you are using a Mitsubishi HTS-100, you can use the POWER,
VOLUME, and MUTE buttons to operate the receiver.
If you are using a Mitsubishi HTS-300, you can use the POWER,
CHANNEL, INPUT, VOLUME, ENTER., numbers (0-9), INFO,
MENU, CANCEL, AUDIO, VIDEO, ADJUST, and MUTE buttons
to operate the receiver.
If you are using a Mitsubishi M-VR400 or M-VR600, you can use
the POWER, VOLUME, numbers (0-9), a_d MUTE buttons to
operate the receiver.
If you are using the Mitsubishi M-CD500 CD changer, you can use
the PAUSE, STOP, FF, and REW buttons to operate the CD
changer.
Getting Started 43