Table of Contents
Advertisement
TV+VCR+cable
with
a cable
box
(cont.)
_>Important:
_>Important:
_>Important:
procedure
(See illustration
on the following
page.)
O Connect
the incoming
cable to the IN terminal
on the cable
box.
O Connect
a coaxial came to the OU_2 terminal
on the back of the
cable box; connect the other end of this cable to the ANTENNA-
IN terminal
on the back of the VCR.
Connect
the second coaxial cable to the ANTENNA-OUT
termi-
nal on the back of the VCR.
Connect
the other end of this cable
to the antenna
terminal
on the back of the TV.
O Connect
an RCA pin.-type video cable to the VIDF, O OUT termi-
nal on the back of the VCR.
Connect
the other end of this cable
to the VIDEO INPUT
terminal
on tb e back of the television.
If you are connecting
a Super VHS (S-VHS) VCR, use a Super
Video cable instead
of an RCA pin-type
video cable.
Connect
a
Super Video cable to the S-VIDEO
OUT terminal
on the VCR.
Connect
the other end of this cable to the S-VIDEO
IINPUT termi-
hal on the back of the television.
O
Connect
a set of RCA pin-type
audio cables to the AUDIO OUT
terminals
on the back of the VCR.
Use the red cable to connect
the right (R) channel
and the white cable for connecting
the left
(L) channel.
Connect
the other ends of this came to the AUDIO INPUT
terminals
on the back of the television.
If your VCR is monaural
(non-stereo),
you will only connect a single
RCA pin-type
audio cable.
Connect
the cable to the VCR, then
connect
the other end to the L (LEFT)
audio input
on the back of
the television.
If your VCR has the video channel
swit,:h,
set to "OFF/AV" mode.
See your VCR's owner's
gmide for details.
O Set the VCR to the playback
mode.
O To view the VCR, select the external
input
source by using the
INPUT
button
on the control panel
or remote
control.
32
Chapter
2:
Connecting
Your TV
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
