Mitsubishi CS-40307 Owner's Manual page 69

Customizing the A/V Memory position (cont.)
• Choose "Off" if you connected the audio system to your TV and
you want to play the sound of your TV througl:., the audio
system.
adjusting the audio functions
You can adjust the audio settings for any A/V Memory position
using the MENU or AUDIO buttons on the remote control.
access with the MENU button
0
0
0
I_ Audfo Function
Standard
[] Listen to : Stereo
[] Bass
[] Treble
[] Balance c_ii.i_
[] Surround : Simulate
[] Speaker : Off
0
0
0
0
Press the MENU button on the
remote control. The TV Main
5Ienu will appear on the screen.
Use the ADJUST buttons to
select "Select A/V Memory."
Press ENTER twice to display
the settings for the selected
audio mode.
The four A/V Memory positions
appear. SelecL the A/V position
to adjust by pressing the
ADJUST uphtown buttons.
When the des.ired position is
selected, press ENTER.
The audio settings for the
selected A/V :Memory position
display. Use the ADJUST up/
down buttons to select the
setting to change and press
ENTER.
The setting appears at the bottom of the screen.
While the function is still on the screen, use the ADJUST right/
left buttons to adjust the function's setting.
The functions will disappear
from the screen after a few sec-
onds. (You cannot adjust a function if it is not on the screen.)
Getting Started 69