Mitsubishi CS-40307 Owner's Manual page 52

Setting the clock (cont.)
[] Set the Clock
[] Auto clock: On
[] Day : Sunday
[_ Time : 12:00 pm
r6] Time zone: Central
[] Daylight
sav,ngs : Off
I-_ ADJUST to select
_-] ENTER to enter
i _ MENU to go back
If you follow daylight savings,
use the ADJUST buttons to
answer the question with "On."
OLherwise, answer "Off." Press
ENTER.
The automatic clock set up is
completed. The screen will
return to the "First Time Setup"
menu.
_Important:
The TV's clock will not; be set until you tune your TV to a channel
that is broadcasting the time via Extended Data Services (XDS). If
your TV loses power, you will need to tune to that channel again to
reset your clock.
"n _" " "
Z>Import_t: Ifyou set"Daylight savl g_ to On, your TV willadjust the dock
by one hour when daylight savings begins and ends.
[] Set the Clock
[] Auto clock: Off
[] Day : - -
[] Time : - - : ....
I_ ADJUST 1o select
ENTER to enter
MENU to go back
setting the clock yourself
• Use the ADJUST buttons or the
key pad to set "Auto clock" to
"Off." Press ENTER.
• Use the ADJUST buttons to
select the "Day." Press ENTER.
[] Set the Clock
[] Auto clock: Off
[] Day : Sunday
[] Time : - - : ....
_] ADJUST to select
ENTER to enter
MENU to go back
• Use the ADJUST buttons or
number buttons to set the
"Time."
• After you haw_ set the "Day"
and "Time," press the ENTER
button to start the clock.
The screen will return to the "First;
T!me Setup" menu.
52
[] Set the Clock
[] Auto clock: Off
[] Day : Sunday
[] Time : 12:00 pm
] DJUST to select
ENTER to enter
[_ MENU to go back
Chapter 3: Operating Your TV
>Important:
You can clear the time by pressing
the CANCEL bul:ton when "Auto
clock" is highlighted.
If you are receiving a VCR signal
on channel 3 or channel 4, the
automatic setting may not work
correctly.