Using The Replay Feature - Mitsubishi VS-5075 Owner's Manual

Using the Replay feature
O Current setting
:Replay
Three images of
previous scenes will
be shown on the screen after the PAUSE
button is pressed. Timing between
images can be controlled by adjusting
speed. This feature is available on
Antenna A (Ant-A) and External Inputs.
Use these buttons on the remote:
[] ADJUST [] ENTER 1_ MENU to
to select to enter go back
[] USE ADVANCED PIP
[] Current setting
: Replay
O Replay Speed
: 1
Three images of
previous scenes will
be shown on the screen after the, PAUSE
button is pressed. Timing between
images can be controlledby ad usting
speed. This feature is available on
Antenna A (Ant-A) and External Inputs.
Use these buttons on the remote:
F_ADJUST [] ENTER [_] MENU to
to serect to enter go back
oooO
c___ c:_
c=_O(30c=_
'=_0 (3 0
0
0
0
0
Select "Use Advanced PIP" in
the "Advanced Features" menu
and set it to "Replay." (See
"Selecting an advanced PIP
function," page 84.)
Set the replay speed between 1
(short interval) and 9 (long
interval).
Use the MENU button to return
to the normal picture.
Press the PAUSE button. The
TV will memorize seven frames
of video from the main image
and display the first three of
these frames as PIP images.
(The interval between the
frames is determined by the
replay speed set in step _.)
A
PAUSE
[]
[]
[]
Each time you press the
PAUSE button, the memorized
fr.ames will shift upwards.
Tt) cancel the PIP images, press
the PIP button twice.
*al - a7 : memorized frames
PAI_SE PA(_SE PAUSE PAUSE! PAUSE
PAUSE{_
100 Chapter 4: Using the Special Features