Mitsubishi VS-5075 Owner's Manual page 28

Projection TV + antenna or cable without a
cable box
equipment you will need
If you have a standard 75-ohm coaxial cable, you will not need
additional equipment. If your antenna has two leads (called flat
twin leads), you will need:
• one 75-300 ohm transformer.
Projection TV
Rear Terminals
75-Ohm Coaxial
Cable
_-_ -- Flat Twin Leads
O
O O
//
Transformer
VIDEO
(_ ANT-A
(_) EXT-,'
CABLE LOOP
our
1_ AN"-B
connecting a cable
O Push or screw the end of the cable onto the ANT-A or ANT-B
terminal on the Projection TV.
connecting an antenna with fiat, twin leads
O Use a screwdriver to connect the leads to the transformer.
O Push or screw the transformer onto the ANT-A or ANT-B
terminal on the Projection TV.
28 Chapter 2: Connecting Your Projection TV