Mitsubishi VS-5075 Owner's Manual page 35

Projection TV + VCR + cable with a cable box
equipment you will need
This hook-up will allow you to record scrambled channels while
watching a non-scrambled channel. When you complete this
hook-up, you should set up your remote control to operate your
cable box (see page 48).
To complete the hook-up, you will
need:
• four 75 ohm coaxial cables,
one two-way splitter,
one set of RCA pin-type audio
cables,
one RCA pin-type video cable,
(if connecting a standard VCR),
OR
_Important:
• one S-video cable (if your VCR
has an S-video output).
For instructions on using the built-
in VCR tray, see page 109. (Model
VS-5075, VS-5077 only).
Basic Connections 35