Mitsubishi VS-45VA2 Owner's Manual page 73

Using the super quick view tuning (continued)
[;>Important:
_> Important:
D Important:
using the enter/cancel button
< setting the super quick view tuning >
0 Select your desired channel with charmel control (SCAN).
0 While the channel number is still displayed on the screen, press
ENTER. The letters"SQV" will appear under the channel number.
If "SQV'" does not appear, press ENTER until it does'.
0 Repeat steps 0 0 until all desired channels are memorized.
0 Press the quick view (Q.V.) button to cycle through the channels
you have selected.
Up to ten channels can be memorized in Super Quick View. If you try
to memorize more than ten channels, the letters"SQV" will flash telling
you that the memory is full. Your must delete a channel from :memory
before adding a new one.
< cancelling the super quick view tuning >
0 Select the channel you wish to delete flora Super QuickView memory
by pressing the channel control (SCAN) or the quick "view (Q.V.)
button.
O
While the channel number is still displayed on the screen, press
the CANCEL button. The letters "SQV" will disappe,_r from under
the channel number, and the channel will be deleted from the Super
Quick View memory.
When there are channels in the super quick view (SQV) memory, quick
view (Q.V.) is not available.
If the channel number is not displayed on the screen, or if :itdisappears
before you press the ENTER or CANCEL button, press the DISPLAY
button.
Using the Advanced Features 71